
Superquartz Floor Repair Systems
Superquartz
A.W.F. Superquartz is the ultimate concrete repair system designed and developed for areas subject to high wear, floor movement, chemical or effluent attack. Superquartz is a technological breakthrough utilizing the most advanced synthetic resins, specially blended quartz aggregates which together are capable of providing the ultimate repair to damaged concrete. A.W.F. Superquartz is ideal for repairs to walkways, damaged steps, ramps, loading bays etc.
- Can be feather edged
- Compressive strength of 7-8,000 lbs/psi after only 24 hrs.
- Very easy to use and apply
Superquartz Pourable
- Easy to use
- No complicated mixing
- Quick cure time
- Totally waterproof
- Chemical resistant
- Immensely strong
- Self levelling
- Simply mix and pour into the repair
- Mix it thicker for structural repairs.
- Resins and aggregate can be purchased separately
- Bonds to most substrates
- Add bauxite to give a anti-slip finish (sold separately)
- Cure time only 6 hours
- Cost effective
Superquartz Rapid
Superquartz Rapid has been specifically designed to carry out repairs with the minimum loss of production time. It has all the characteristics of Superquartz but with a cure time of only 1-3 hrs. This tremendously durable system will not shrink or crack during the curing process and has fantastic in-built strength and durability.
- Areas can be back in action within 1-3 hrs
- Can be feather edged
- Excellent chemical resistance
- After 24 hrs. 38 ton trucks can be traversed over the repair
Superquartz Screed Grade
Superquartz Screed Grade as all the properties of the Superquartz range, extremely hard wearing with excellent resistance to abrasion and impact. Offers good non-slip properties. Resistant to a wide range of chemicals, based on low odour and none tainting properties is ideal for food processing areas. Will bond to most substrates including metal and can be applied down to 3mm thickness with the aid of a tack coat. Supplied in 5mm and 10mm grades.
Superquartz Lightweight
Superquartz Lightweight is a system developed for high build repairs to eroded, damaged or spalled areas of re-inforced concrete. It can be applied to a thickness of 100 mm in one pass without slumping and being 100% solids there is no shrinkage during the curing process.
- Ideal for vertical or overhead work
- Tolerant to cold and damp surfaces
- Excellent weathering capabilities
Rapid Range Floor Repair Systems
Instant Tarmac Repair
For fast effective repairs to asphalt, tarmac and similar surfaces. A.W.F. I.T.R. Is a combination of high quality quartz aggregates and specially formulated epoxy resin, which bond immediately the system has been applied to the substrate.
- No heating or tack coat ( Can be applied at - 40°c )
- Can be used in wet or dry conditions
- Single pack, so no mixing
- Can be traversed immediately


Rapid C.R.
Rapid C.R. Is a two pack repair system designed to repair concrete in Minutes. Rapid C.R. has no critical mixing ratios. And the system will bond and adhere to damp surfaces.
- Easy to use and feather off
- Non Toxic - Non Tainting
- Cures in minutes
- Can be applied to a damp substrate
Rapid Quickset
Rapid Quick Set is an easy to use cementious repair system designed for speedy and effective repairs to concrete, even in wet conditions.
- No complicated mixing ( Just add water )
- Cures in minutes
- Easy to apply
Rapid Water Plug
- Instant setting repair compound
- Will seal against active water
- Ideal for sealing cracks & joints
- Exception structural strength
Rapid C.W.C.
Rapid CWC is a high performance polymer modified cementitious compound designed to provide a barrier against subsurface water. An outstanding waterproofing compound. This unique blend forms insoluble crystalline complexes within fine shrinkage cracks and capillary tracks within the concrete to form a water resistant barrier that resists hydrostatic pressure of up to 7 bar.
- Withstands hyrdostatic pressure of 7 bar.
- Ideal for sealing sub-surface concrete walls.