Floortect H.B.

The Ultimate Industrial Floor Coating System Available Today Floortect H.B. is very easy to apply by brush or roller and is ideal for use in any industrial or commercial environment that requires the ultimate in floor protection.

• Six times thicker than normal coatings
• Low odour during application
• Totally impervious once cured
• Very easy to clean
• Excellent chemical resistance

Floortect H.B.D.

The Ultimate Industrial Floor Coating System Available Today Floortect H.B.D. is very easy to apply by brush or roller, this is the ultimate in floor protection, ideal for those very hard wear areas.

• Nine times thicker than normal coatings
• Low odour during application
• Totally impervious once cured
• Very easy to clean
• Excellent chemical resistance

Floortect W.B.

Floortect W.B. is widely used both in the food and dairy industries. Being a water dispersed epoxy, it is totally odourless during application.

• Will adhere to damp surfaces
• Can be applied over existing coatings
• Good abrasion and chemical resistance
• Can be applied to a wide range of surfaces including glazed tiles
• Supplied with its own unique aggregate

Floortect S.P.

Floortect S.P. is an inexpensive single pack industrial floor coating, designed for those larger areas that do not require the protection of a twin pack epoxy floor coating.

• Very easy to apply by brush or roller
• Provides a hard seamless finish
• Areas coated are back in action next day
• Also supplied in linemarking grade

Floortect X.S.L.

Floortect XSL is a high performance solvent free epoxy self-levelling floor screed for use on almost any worn or uneven floor area. Applied by serrated trowel (serrations in the trowel should be 3mm deep to give a thickness of 2mm etc.) and spiked roller.

• Coverage @ 1mm approx.: 10.8m2
• Totally chemical resistant
• Impact and abrasion resistant
• Self-levelling properties.
• Meets all food regulations for incidental contact
• Back in use within 24 hours

Floortect F.B.

Floortect FB is a high performance solvent free ceramic reinforced polyurethane system specificaaly designed for use as a high build flexible floor coating.

• Impact, abrasion, chemical resistant with a high degree of flexibility.
• Offers outstanding adhesion (with the aid of Floortect FB Primer) to most mineral substrates including asphalt.
• Applied by Brush or roller
• Ideal for use in the food industry.

Dustproof S.P.

Dust Proof SP is a single pack resin system designed to eliminate dust given off by old a deteriating and porous concrete floors. It also seals. Hardens and protects the host substrate. It is especially suited to heavy wear areas and is simply poured onto the floor and spread evenly with a brush or squeegee to ensure saturation of the floor area being treated.

Acid Etch

A.W.F. Acid Etch. Fast, active chemical reaction working immediately upon impact and transforming a polished power float finish into a surface with a slightly etched texture.

A.W.F. Acid Etch has been developed to provide an immediate, effective and inexpensive cleanser for concrete areas prior to receiving any resin based flooring.

Universal Primer

Universal Primer is a high performance multipurpose water-based primer specifically designed to act as a tie coat over existing coated surfaces and non-porous substrates including tiles, brickwork, plaster and power floated concrete. Universal Primer is an environmentally friendly primer which can be over coated with a wide variety of A.W.F. systems.